Zeny Kohree F2C Aoyue Flexzion X-TRONIC Yihua Hot Air Rework Soldering Iron



Zeny 2in1 SMD Hot Air Rework Soldering Iron Station 862D+ Repair Tools 4 Nozzles As Free Gifts


  • Hot air and hot iron 2in1 rework soldering station
  • Extremely low noise and space saving design
  • Advanced SMD technology for more stability use
  • Dual LED digital displays to show precision temperature,
  • SAMSUNG microcomputer control, quick warmi






Product description

Both the soldering iron and the hot air gun have a temperature range of 100 - 480C.
Digital PID technology to enhance temperature stability
Adjust the airflow and temperature control rotation easily
Automatically stop rotation when the temperature is less than 70°C
Intelligence self-detection function features safe personal operation
Auto and manual startup function of airflow temperature for more personality and convenience
Handle with sensor switch features access operating mode when picks up or standby mode when lays down
Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun
ESD design of soldering iron to protect sensitive components
International standard heater for convenient use and exchange
High-quality resistance for durable use
Plastic holder for placing the hot air gun
Alloy iron stand for keeping the iron from flammable materials
Fits for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA,SMD,etc.(especially mobile phone cable)

Customer Reviews

I wasn't sure about this when I bought it, but within a few minutes of receiving it I was glad I bought it. After a few weeks of pretty heavy use, I'm *really* glad I bought it.

It's inexpensive but, AFAICT (I haven't done an EEVBlog-style tear-down), not cheap. I've never used a really high-end soldering station so I can't comment on how this compares to one of those, but I'm upgrading from a Weller WPS18MP (which I was actually pretty happy with), and at the very least this is better than that was.

Both the soldering iron and the hot air gun have a temperature range of 100 - 480. Desoldering with the hot air gun works well, and if you turn down the temperature it is great for heat-shrink, too. I haven't had any problems with either the hot air gun or the soldering iron.

Bottom line: I think it's a really good value, and I don't have any regrets about buying it.

See more product details



Kohree 110V LED Digital 858D SMD Hot Air Rework Station Solder Blower Heat Gun



  • Zero-crossing triggering temperature control of microcomputer
  • high power, rapid rise of temperature, high and stable temperature
  • Air flow can be modulated via the knob, large and soft air flow/LED digital display
  • a conductive switch on the handle
  • Plastic shell, cabinet; good-looking, occupies little space



Customer Reviews

I can't believe I soldered before having this. this plus solder paste is a very versatile tool. It makes it safer and faster to rework my messed up work and my new soldering more precise. I probably use this more than I should but the speed to heat up is fantastic.

The solder tool knows when you have put it down and after an extended period will shut off. When you pick it back up, it turns back on. I have no idea what that power switch is for, it doesn't do anything that I can tell. When you are in between solder points put the tool on the rest and forget about it. the rest can be put on either side of the unit, I put it on the left because I put the unit on my right.



The blower speed control is pretty good. The heat precision is good. Very fast heat up time.

This thing will ask for almost all the current you can get out of a 15a 120v circuit. If you have it on a GFCI, it may trip it if there is significant parasitic draw on it. I couldn't plug it in with my coffee maker turned off, it kept tripping the GFCI.

I usually have to plug this into a circuit I know is mostly inactive. I recommend putting it in a 20a circuit so this thing gets the current it needs. Sorry, Celsius temp reading only, but that's okay because most datasheets standard unit is Celsius.

See more product details


2 in 1 SMD Soldering Hot Air Rework Station + Stand 3 Nozzle 5 Tips 852d+ Iron Mark Ethan



  • Mark Ethan- Samsung Chip Microcomputer Control- Very Fast Heat Up process & Stable Temperature
  • Sensitive Components Protected by ESD Design Of Soldering Iron. Simple To remove and replace tips
  • Adjustable air flow and temperature control for stop rotation. 6 Tips + 3 Nozzle + IC pick included
  • Large LED Displays give accurate display of temperature of hot air gun and Iron.
  • 30 Day unconditional return Policy. ESD design 110V


Product description

Samsung Micro Computer control built in for very quick warm up. Stable and accurate temperature control. Amount of airflow does not impact temperature Soldering Iron. The Hot Air Gun can be used at the same time or independently as the user needs.
High end ESD design protects sensitive components
Lead Free Soldering 28L Diaphragm pump Adjustable temperature control and Airflow Great For -Pre-heating, lacquer removal, glue soldering, heat shrinking, ice out viscosity removing.
Plastic Stand included with sponge to keep hot iron safe, metal stand to keep hot gun safe.
Samsung Microchip design allows cool airflow to dramatically extend the life and safe operation of the product
Great for PLCC, QEP, BGA, SOIC, Chip and other components sensitive to temperature Dimensions 5'' X 8" x 11" 110v 50/60HZ
Includes Important Safety Note- REMOVE THE RED METAL PROTECTIVE SCREW at the bottom of the station before using - the screws are only there to protect the unit in transportation - it needs to be removed failure to remove can short out the hot air.
Hot Air Gun Spec: Air flow volume: 24-30L/Min Temp. Control: 100-500 degree C Temp. Stability: +/-2 degree C Power consumption: 550W Air pump type: Diaphragm pump Soldering Iron Spec: Power consumption: 60W Temp. Control: 100-500 degree C Temp. Stability: +/-2 degree C Heater Material: Nichrome List of included components Main Soldering Station/ Hot Air Gun/ Hot iron included- 3 nozzles included, steel holder included 6 iron tips - 5 in the bag and 1 already installed in the iron. Plastic stand with sponge reinforced IC Extractor steel holder
Iron temp- 212- 900 degrees F Hot Air Temp - 212 - 932 F
All temp readouts are in Celsius

Customer Reviews


Purchased this for personal microelectronics use, primarily on datacenter components; I recommend this product highly for use in this environment.

Arrived on time and the seller sent a very helpful email with youtube setup instructions and basic soldering guide; they clearly value customer service.

See more product details

My first use: minimal set-up required (<5 are="" chinese="" english="" font="" if="" in="" instruction="" is="" manual="" mins="" new="" note:="" official="" on="" please="" poorly-translated="" primarily="" s="" screwdriver="" secondary="" seller="" set-up="" soldering="" station="" the="" to="" use="" video="" watch="" with="" you="" youtube.="">

My project was simply to add 4 inline 47 ohm resistors to 4 fan power cables on a 2U server chassis. The soldering station has separate power and temperature controls for the soldering iron and the hot air gun. I used 400C with the fine tip to heat the cable and resistor pin to apply the solder; the unit got to temperature in about 10 seconds, and applied quality, stable heat throughout the project.

This station is particularly useful with the attached hot air gun, as I was able to shift very quickly from soldering to hot air to heat the shrink wrap over each of the 4 solder jobs. Most heat wrap needs 125-150C; used less than 200C air, and you can control the air flow rate with a nob on the front of the unit as well.

See more product details



F2C 2in1 862d+ SMD Soldering Iron Welder Hot Air Gun Rework Station LED Display W/4 Nozzle + Accessories 110V(model#1)



  • Heating element in iron upgraded to steel; in hot air gun upgraded to ceramic one
  • SAMSUNG microcomputer control, quick warming-up,The high temperature- resistant silicone line is ado
  • Dual LED digital displays to show precision temperature,Power:700W
  • Iron is anti-static design,Accessories included 4xnozzles,5x Tips for free
  • Suitable for heating shrink, paint drying, adhesive removal, thawing,warmin..


Product description


Brand new 2in1 SMD Rework Soldering Station 862D+ which is improved from 852 and 862 series and inherited all advantages.
Alloy metal body with high-quality silicone shell features elegant appearance and power saving.You can use hot air gun and soldering iron separately, with no interference with each other.The newest microcomputer processor PID program control technology ensures rapid warming-up and the stable accurate temperature control. SAMSUNG chip control circuit with latest SMT process features the whole signal flow more clarity, stability and security, really achieve lead-free soldering and desoldering.Especially suitable for mounting and reworking SMD components by hand.Fits for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA,SMD,etc.(especially mobile phone cable) 

Customer Reviews

I'll start with I got this on a deal of the day for $25 shipped, so I didn't have any misconceptions that it'd be top-of-the-line. I use Edsyn and Weller soldering stations at work, but have been using a cheap Elenco uncontrolled soldering pencil at home. Figured this would have to be an upgrade from that, and with hot air to boot.

The unit seems to work pretty well, truth be told. I've only messed around with it for about a day, but the soldering station and the hot air station both seem to react to temperature (and fan speed for the hot air) adjustments, and the soldering station seems to have plenty of wattage behind it.

I couldn't find a reliable source of information about the operating voltage of the soldering pencil itself, and can't seem to find a pinout that would allow me to test it with a scope.

One annoying thing I DID find--and the reason for a low review--is that the published tip-to-ground reading is false. Mine was completely OPEN. I rectified this by paralleling the tip grounding conductor from the pencil's cable to chassis ground inside the soldering station, while still maintaining its connection to the control board.
See more product details



4-in-1 Soldering Station Digital Hot Air Rework Station Vacuum 968DB+ w/ 11 Tips Smoke Absorber



  • Easy Operation -4 in 1 Soldering rework Station- Hot Air Gun, soldering Iron, smoke absorber, Vacuum
  • Quickly Heats and Maintains perfect set temperature once reached- Samsung Chip digitally controlled
  • 11 tips , 6 nozzles - tips interchangeable with Hakko Brand. Vacuum included on soldering iron
  • Built in Air Flow Gauge - Knob also included to adjust air flow. Celsius / Fahrenheit conversion
  • Smoke absorber helps maintain a more odor free enviornment. PID temp calibration.

Product description

Comes with: -- Hot Air Gun, soldering Iron, smoke absorber, Vacuum pickup. Easy to read digital display shows real time temperature.
Quickly Heats and Maintains perfect set temperature once reached- Samsung Chip digitally controlled - highest quality in the industry. 70 watt soldering iron with 50 watt heating element. ESD design
11 tips , 6 nozzles - tips interchangeable with Hakko Brand. Spare heating elements for Hot air gun and iron included. Vacuum included on soldering iron to remove smoke.
Built in Air Flow Gauge - with highly visual wind ball to show pump air pressure. Knob also included to adjust air flow. Celsius / Fahrenheit conversion Digital Display.
Diaphragm pump for hot air hand piece- when hot air switch is on hot air gun continues working at set temp and air flow. CE Approved.
Samsung Microprocessor at core of unit enables quick heat up process and the most accurate temp reading in the industry.
The smoke absorber and vacuum or great for maintaining a more odor free environment .
Main Application – Cell Phone and computer repair- also excellent for - for SOIC, CHIP, QFP, PLCC, BGA, SMD and temperature-sensitive components.- Can be used for paint drying, thermo shrinking, warming, thawing, plastic welding adhesive removal, Glue soldering, etc
Short circuit open circuit overload and over temp protection
Diaphragm pump is audible 60db

Customer Reviews


Well i come from a mechanical background have done a ton of soldering in cars and making wiring harnesses i am a licensed aircraft mechanic this station appears to be very well built despite it being built overseas which is probably a big issue for some. Well if i run into any issues after setting it up in my electronics room and getting some use out of it I'll amend my review. It's nice that it also comes with an extra heating element for both the heat gun and the iron.
See more product details


3-in-1 Soldering Iron Rework Station Hot Air Gun 853D DC 10 Tips welder 3 in 1 YIHUA



  • Comes with either Yihua or Mark Ethan Branding - Very Fast Heat Up process with very accurate and Stable Temperature Control by Samsung Chip Microchip
  • 1- Soldering Station w/ 10 iron Tips & 1 Hot Air Blower w/ 4 Nozzles soldering wick
  • Air Flow: 120 L/ Minute from the Hot Air Gun- brushless fan makes a very gentle wind
  • Soldering iron and Hot air gun can be used simultaneously if needed.
  • ESD Safe. Iron is Anti Static design. Digital LED Displays. Low Noise



Product description

Digital LED displays --- Analog Meter Functions can be used simultaneously or independently Overtemp and over load protection by short circuit Intelligence. Advanced SMD technology for stable temperature control.
Cool air flow to extend life of the hot air gun and ensure safe operation
Iron Gun: 50 watts Temperature control between 200C - 480C degrees C Celsius Temperature stable and accurate within 5 degrees C Tip Ground Voltage: < 2mV Tip Ground Impedance: < 2ohm Resistant heat material - Nichrome ESD design. Great for soldering and desodering SOIC, CHIP, QFP, PLCC, BGA,SMD,etc
Mobile signal strength auto recovery is very compact while providing all the needed 3 functions. All 3 functions can be used simultaneously or independently if needed.
Hot Air Gun: 800 watts Temperature control between 90 Degrees C - 480 degrees F Temperature accurate within 4-5 degrees- Temperature is stable Brushless ball fan 25mm hand piece size DC Power Supply: Output Voltage:: DC 1V ~ 15V Load Stability: < 0.01 ± 2mV Temperature Coefficient: < 300ppm/degree C Ripple dB: < 1mvrms (Virtual Value) Protection Current: 1A Package Includes: Main Unit Hot Air Gun Hot Iron w/ 900M-T-I Tip Plastic Stand w/ sponge Steel Holder Desoldering. Digital PID technology to enhance temp stability. Great for heating shrink, paint drying, adhesive removal, thawing,warming,plastic welding.

Customer Reviews


I've been servicing electronic gear for years and have wanted a hot air station but most of the stuff I work on dont need it and I couldnt justify the several hundred dollars for the ones I had been looking at. Then that one repair would come in where if I had one of these it would make my work so much easier. Then I saw this unit by mere chance on Amazon. $100? Really!? For that price, if the thing didnt work I at least got a power supply and another soldering station!

I just got it about an hour ago and immediately flipped over a PC board in a Yamaha audio mixer Ive had in the shop for months. I had planned to rebuild it from a lightning strike but kept putting it off because I knew what a pain it was going to be to replace those components half the size of a grain of rice. My smallest soldering tip looked like a shovel next to those parts!
See more product details
This station came completely assembled except for mounting the hot air tool holder which mounted quickly with the two screws supplied. I was surprised the soldering iron looked exactly like my Hako 900 stations! I suspect they are the same but cant make that statement for sure. I just know holding them side by side except for the brand name you cant tell them apart.

I plugged everything up, turned it on, and didnt know what really to expect. Of course the soldering iron got hot, but nothing was going on with the hot air tool. The manual says it must be in the holder before you turn it on. Well, I did and nothing happened - until I lifted it out of the holder!!!! NOW I knew why you have to have the gun holstered before you turn on the power. Turns out there must be a magnetic switch that keeps the hot air tool off until you need it. That thing ran up to 325 degrees in less than 30 seconds or thereabouts. If you had it laying out on your workbench and turned the machine on, you'd have a burn mark in your table top before you realized it!

See more product details


Aoyue 968A+ SMD Digital Hot Air Rework Station



  • 4 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber
  • Maintains a constant set temperature when the set and the value is reached
  • Digital display for the Hot Air of the actual and set temperatures with touch control
  • Built in Air Flow gauge and knob adjustment for the air flow
  • Digital Display for soldering iron and a digital calibration and auto sleep function



Product description

The NEW 968A+ has the following new features: 70 watt soldering iron with smoke absorber, Digital Display for the Soldering Iron Temperature, Soldering Iron Holder, Vacuum Pickup Kit, 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air, Digital Calibration and Adjustable sleep timer for the soldering iron.

The Quality and features available on this unit are the best in the industry.

Soldering Iron Features: 70 Watt Iron using low cost standard tips Creative built-in smoke extractor that absorbs the fumes created at the source when soldering. Digital Display Digital Calibration Feature Microprocessor controlled element for precise temperature control Adjustable sleep timer Configurable soldering iron holder that uses a sponge or a brass coil

Hot Air Features Microprocessor precisely controls temperature and airflow Visual Air Flow gauge Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached Digital display of hot air set and actual temperature. Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.

ESD Safe Unit that meets CE and RoHS.

Package List: 968A+ station with hot air gun 70 Watt Soldering iron with Silicone Cord Hot air gun holder Soldering iron holder made of Aluminum and with sponge and brass coils. Vacuum Pickup kit with 3 suction cups to easily pickup IC's Spare Heating Elements for the Hot Air Gun and the Soldering Iron 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)) IC popper 5 Air nozzles ( 1124,1130, 1196, 1197, 1313 BGA-M) 2 Filter pads Instructions Power cord

Note:Solder is not Included SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Customer Reviews


Check over very closely before using: item was listed as 110V version & came with 110V plug, yet is very clearly labeled both externally and internally as the 220V version.

Case was installed backwards at the factory (mounts for hot air wand were in back).

The infamous red shipping screw was already removed--though label is still on the casing.
See more product details
When plugged in, the soldering iron panel was completely inoperative (didn't actually realize the voltage error until I dug deeper). Of course the internal transformer is outputting half the voltage, I suspect that's the reason why many of the reviews list a DOA soldering iron. The hot air worked, but temp was wildly inaccurate--likely same cause.

No exchange offered, so returning to Amazon rather than running a 220v line just for a small appliance.

See more product details


2in1 878ad Soldering Iron Rework Station Hot Air Gun + Tip + 3 Nozzles Heat Gun Holder Welder Yihua



  • Samsung Chip Microcomputer Control- Very Fast Heat Up process with very stable temperature
  • Adjustable hot air gun air flow and temperature control with safety cool-down feature
  • Hot air gun automatically turns off when set down for safety. ESD-safe design. •Analog knob with both degrees Celsius and Fahrenheit markings controls soldering iron temp via closed-loop feedback control.
  • 3 air flow nozzles, nozzle removal wrench, solder sponge, 1 very fine soldering tip, stable plastic stand for iron
  • Digital 3-number 7-segment LED display shows precise temperature of hot air gun.Digital up/down buttons control hot air gun temp (in degrees *Celsius* ONLY).



Product description

Hot Air Gun: 650 watts, 110V temperature control from 100C (212F) to 450C (842F) (+/- 2C [+/- 3.6F] accuracy). When you turn off the hot air gun, or place it onto its holster, it has a safety cool-down feature which keeps the fan on until the temperature drops below 100C. Note that the digital display is ONLY for the hot air gun, not the soldering iron, and that it only displays in degrees Celcius, NOT Fahrenheit. For safety reasons (since it uses full wall voltage), the hot air gun is *not* unpluggable from the base station. Removable Soldering Iron (model 907A, 5-prong): 50 watts, 24VAC temperature control from 200C (392F) to 480C (896F) (+/- 2C [+/- 3.6F] accuracy). Iron heats up quickly and is controlled via the analog knob which has both Celsius and Fahrenheit markings. Like the hot air gun, the soldering iron uses a closed-loop feedback temperature control system to precisely hold the set temperature. A single LED indicator lights up when the soldering iron is heating, and turns off when power is internally disconnected by the automatic temperature controller, thereby showing the automatic temperature control function in action. The soldering iron is easily unpluggable from the base station. Due to the internal temperature control system, temperature control is not affected by air flow. Digital LED display shows precise temperature of the air flow from the hot air gun. Temperature is set very easily via the digital up/down buttons. Unit is great for heating SMD (surface mount) and other components safety and quickly. Very durable, high quality nichrome heating coil and quiet, brushless fan. Hot air gun comes with its own plastic holder. When the gun is placed into the holder a sensor automatically turns the unit off and puts it into its “safety cool-down” mode, where it turns off the heating element but keeps the fan on until hot air gun temperature is below 100C.

Customer Reviews


I received this item and immediately tried this right away have a few small projects pending on my work table. As soon I plugged it in the hot air gun was turned on. After a few minutes learning the station I began working I'm more of an amateur electronics person but I really enjoyed this I was excited seeing how quickly it heated up and started melting the solder. My older one would take forever to heat up. I had bought a 10 piece tip set and it didn't fit the soldering gun I had but when I opened this station I tried it and it fit perfectly. I soldered and repaired all my projects mostly my kids toys where some solder joints and wires were broken. Everything worked perfectly and I am very pleased. I didn't experience any flimsyness from the soldering iron and I don't expect this station to match a super expensive model. For 65 bucks I'm very pleased and I know I will take care of this station so hopefully it will last me a long time .
See more product details


Flexzion Rework Soldering Station Hot Air Gun Solder Iron SMD DC Power Supply Digital 3in1 Kit 853D Welder Welding Repairing Tool With 3 LED Display 4 Nozzles Analog Meter Probe Cable



Product features

  • 3 in 1 (Soldering Station, Hot Air Rework Station and DC Power Supply)
  • Extremely low noise and space saving design
  • Two LED digital displays to show precision temperature; One LED display to show the mobile RF signal and testing voltage
  • PID technology to enhance temperature stability, quick warming-up; PID microcomputer control, over-temperature, short circuit, open circuit, overload protections
  • Adjust the airflow and temperature control rotation easily


Product description

853D 3in1 Station. Based on mobile communication service designed specially to work a 3in1 multi-functional tool. It combines (soldering station, hot air rework and power supply for repairing mobile phones). The three functions can be used independently or simultaneously to get the job done faster, occupies less area, while saving energy. Equipped with dual-core micro-controller, no interference with each other. Providing quick warm-up and stable temperature control without being affected by the volume of airflow, which achieves lead-free soldering and desoldering.

Customer Reviews


This is quite a deal for the money. A soldering station with many of the features of much more expensive models. You can individually power on the soldering pencil, the hot air gun, and the power supply/voltmeter with their corresponding power switches in the front panel. The soldering pencil's temperature can be set up to 400 degrees with the use of a couple of pushbuttons. The hot air gun has a knob that allows you to set the amount of hot air that you want to come out of it. I have not yet made use of the power supply but I did try the built-in digital voltmeter. It is not the best meter, that's for sure. You will get no readings if your voltage is negative - something I found quite odd but then again, I didn't buy this to use as a voltmeter, I bought it to solder and that is something it does quite well. The soldering pencil gets hot really quick and it maintains its temperature nicely even when soldering long, thick wires or tinning pads with a large surface, which tend to act as a heatsink and are tough to solder. The heat gun works great! The tips let you focus the heat onto just the right amount of surface, making rework quite easy. This is a great buy!
See more product details


"ALL IN ONE" X-TRONIC - MODEL #5040-XTS HOT AIR REWORK SOLDERING IRON STATION & PREHEATING STATION - 4 Hot Air Nozzles - 10 Asst. Solder Tips - Pinpoint Tweezers - IC Popper, Gootwick - FREE 5X Mag Lamp 



  • This product does NOT include textiles, fur, or fiber components
  • Imported
  • "ALL IN ONE" Hot Air Rework Soldering Station Preheating Station - C/F Conversion
  • Samsung Microcontroller - PID Control Technology - Complete Digital Control "MAGIC TEMP TECHNOLOGY"
  • 1270W Total Power Consumption - 70W Soldering Iron - 500W Hot Air Gun - 700W Preheating Station
  • 10 Soldering Tips - 4 Hot Air Nozzles, Pinpoint Tweezers, IC Popper, Gootwick & 5X Mag Lamp



Product description

The "3 In 1" X-TRONIC 5000 Series - Model #5040-XTS Fully Digital (ESD Safe) Hot Air Rework Soldering Station & Preheating Station. This unit is features a 70 Watt Soldering Iron, a 500 Watt Hot Air Gun and a 700 Watt Preheating Station. You can easily change the LED readouts from "Centigrade to Fahrenheit" for the Soldering Iron, Hot Air Gun & Preheating Station Temperatures with the push of a button. This unit features Magic Temperature Control Technology which the program will cycle every 20 milliseconds to detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature. This unit also has a Self-Test function with full intelligence on over-temps, short-circuits and overloads. The Soldering Iron has a temp range of 200°C - 480°C / 392°F - 896°F Hot Air Gun has a temp range of 100°C - 480°C / 212°F - 896°F. The Preheating Station has a temp range of temp range of 50°C - 400°C / 122°F - 752°F. The X-tronic's 5040-XTS features a telescopic fully adjustable over arm hot air bracket. You can insert the hot air gun and adjust it to a height of up to 7.00" Inches above the bed. The heat bed of the unit measures 4.75" x 4.75" and the circuit board brackets will hold a board up to 6.50" Wide. SORRY BUT WE ARE NO LONGER SHIPPING TO CANADA, ALASKA, HAWAII, PUERTO RICO, ETC OR APO/FPO'S DUE TO THE HIGH COST OF SHIPPING AND DAMAGE IN TRANSIT. ANY ACCIDENTAL PURCHASES FROM THESE LOCATIONS YOUR MONEY WILL BE IMMEDIATELY REFUNDED!!!

Customer Reviews


I ordered this item to repair small electronic devices for customers and family. It came well-packaged and was easy to set up and use. It performed wonderfully for the 2+ weeks of moderate to heavy use that we put it through. One day, just after replacing a charging port on a Kindle Fire, I heard a loud pop from the hot air wand. The temperature started to go down slowly, and after resting it on the stand I noticed that it wouldn't get above 48C-50C. I consulted the diagrams that came with it and other X-Tronic products and realized that the heat coil in the wand had broken.

I called the number for X-Tronic on a Saturday and was met with a message that said their offices were closed on the weekends. I followed that call up with an email to make sure that my issue reached them. Lo and behold, I received a reply on Monday morning notifying me that the warranty certificate (the one others have questioned the signature line, etc. on) was actually true (a rarity in my recent experience). No fine print or red tape here - they would be more than happy to send me a replacement unit (not just a replacement element). There was a slight issue, however. They were sold out and didn't expect more in for 30-60 days.

See more product details


Zeny® 3in1 SMD DC Power Supply Hot Air Iron Gun Rework Soldering Station Welder 853D



  • Hot air and hot iron 2in1 rework soldering station
  • Extremely low noise and space saving design
  • Advanced SMD technology for more stability use
  • Dual LED digital displays to show precision temperature
  • SAMSUNG microcomputer control, quick warming-up


Product description

Brand new 2in1 SMD Rework Soldering Station 862D+ which is improved from 852 and 862 series and inherited all advantages. Alloy metal body with high-quality silicone shell features elegant appearance and power saving. You can use hot air gun and soldering iron separately, with no interference with each other. The newest microcomputer processor PID program control technology ensures rapid warming-up and the stable accurate temperature control. SAMSUNG chip control circuit with latest SMT process features the whole signal flow more clarity, stability and security, really achieve lead-free soldering and desoldering. Especially suitable for mounting and reworking SMD components by hand. Really a must have!
Features:
Digital PID technology to enhance temperature stability
Adjust the airflow and temperature control rotation easily
Automatically stop rotation when the temperature is less than 70°C
Intelligence self-detection function features safe personal operation
Auto and manual startup function of airflow temperature for more personality and convenience
Handle with sensor switch features access operating mode when picks up or standby mode when lays down
Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun
ESD design of soldering iron to protect sensitive components
International standard heater for convenient use and exchange
High-quality resistance for durable use
Plastic holder for placing the hot air gun
Alloy iron stand for keeping the iron from flammable materials
Fits for soldering and desoldering SOIC, CHIP, QFP, PLCC, BGA,SMD,etc.(especially mobile phone cable)
Suitable for heating shrink, paint drying, adhesive removal, thawing,warming,plastic welding.

Customer Reviews

Rework station works as described. However, don't expect much in the way of instructions as the "manual" is in poor Chinese -to-English translation. Those familiar with soldering/rework work should not have any issues operating the station though.

On the plus side, both tools heat up quickly. I had no damaged or missing parts. The variable power supply is relatively accurate (off .1v by my multimeter).

On the negative side, the temperature readings are in Celsius with no Fahrenheit option (not a big deal to convert).
The test probes DO NOT fit the jacks. Two options are available to remedy this problem. Purchase test leads with longer banana plugs or cut the plastic from around the banana plugs on the included test leads (see picture) and it will fit fine. The plastic is soft and is easily cut with a sharp knife. (I decided to cut mine).
The power cord is a little short, the test leads are short (+-8").

See more product details

Bottom line, the work station is perfect for the DIYer that uses the station occasionally. Maybe not for everyday use.

One other thing that I wanted to point out is the included tool with the forked wire. I saw a YouTube video review of this workstation where the guy used the tool to hold a marshmallow and cooked it with the heat gun because he didn't know what it was for. Brilliant idea! But, the tool actually is used to lift and remove components when de-soldering (primarily surface-mount components and chips). That being said, I think it would better serve as a marshmallow holder as it really is pretty much useless for it's intended purpose.
See more product details


X-TRONIC XTR-4040-XTS Digital Hot Air Rework & Soldering Iron Station Bundle (5 Items)



  • "CELCIUS & FAHRENHEIT" TOGGLE SWITCH - INCLUDES 5X GOOSENECK MAGNIFYING LAMP "FREE" ($39.80 VALUE)
  • 700 WATTS TOTAL POWER CONSUMPTION - 500 WATT HOT AIR GUN - 60 WATT SOLDERING SOLDERING IRON
  • HOT AIR GUN: 212°F ~ 896°F/100°C ~ 480°C - SOLDERING IRON: 392°F ~ 896°F/200°C ~ 480°C
  • 4 AIR NOZZLES - 10 ASST. SOLDER TIPS - 1 EXTRA HOT AIR & SOLDER HEAT ELEMENTS - TWEEZERS - IC POPPER
  • 100% - 1 YEAR FIX/REPLACE GUARANTY - ALL PARTS/SERVICE AVAILABLE - X-TRONIC INC. - LINCOLN, NE - USA


Product description

PLEASE NOTE - WE DO "NOT" SHIP TO HAWAII, ALASKA, CANADA, PUERTO RICO, THE VIRGIN ISLANDS, APO'S/FPO'S, ETC. - WE DO "NOT" SHIP TO PO BOXES!!! WE "ONLY" SHIP VIA UPS GROUND!!! The X-Tronic 4000 Series - Model #4040-XTS Hot Air Rework & Soldering Station is an Industrial/Commercial unit that is manufactured by an "ISO 9001-2000 " Certified Manufacturer and comes with a signed and dated 1 Full Year - 100% - Complete Guarantee!!! IF "ANYTHING" GOES WRONG WITH YOUR UNIT WITHIN 1 YEAR OF RECEIVING IT - WE WILL FIX OR REPLACE YOUR UNIT "FREE OF CHARGE"!!!

Customer Reviews


I own this X-Tronic unit and the Aoyue 968 (One for work and one for home). If you were to only buy one unit I would suggest going with the X-Tronic station over the Aoyue. I felt little to no difference in operation/performance when switching between the 2 units when using both the hot air and the soldering side on both stations. The advantage the X-Tronic has over the Aoyue (aside from the X-Tronic costing a little less than the Aoyue) is the assortment of soldering tips that are sent with the unit and the 2 replacement heating elements (1 for the hot air and 1 for the soldering iron). Heating elements and soldering tips do not last forever and having the spare parts on hand will save time in the long run. The Aoyue is not sent with any spare parts and no assortment of soldering tips. Both units are sent with 4 different sizes of hot air nozzles.

One thing I found that I liked better on the X-Tronic is that they use a digital display for both the hot air and soldering iron temperatures. The Aoyue uses the digital display for the hot air side only and an analog dial for the soldering iron side temperature. While this does not affect the performance I found that I preferred X-Tronic's design over the Aoyue.

All in all I am very happy with the X-Tronic rework station and feel the best choice in value if you had to buy one over the other is the X-Tronic rework station. The unit is slightly cheaper than the Aoyue, but you will get the same functionality/performance of the Aoyue, a digital display for both sides (hot air/soldering iron) of the station, a nice variety of soldering iron tips for different applications, and you will be thankful that you have spare heating elements on hand when they inevitably burn out.

See more product details


2-in-1 SMD Hot Air Rework Station & Soldering Iron w/ 11 Tips, 3 Nozzles LED Screen Professional 898D Yihua



  • Brand markings Mark Ethan or Yihua on product Includes hot air gun and soldering iron – very fast heating process.
  • Suitable for manual mounting & reworking of SMD components; heating shrink, and much more!
  • Comes with 11- tips (interchangeable with hakko brand), 3 nozzles sponge, stand, wrench and pick.
  • Fit for soldering/desoldering SOIC, CHIP, QFP, PLCC, BGA &other temperature sensitive components
  • Large LED screens give accurate temperature read out of Hot air and Iron



Product description

Extremely low noise and space saving design
Comes with 3 Nozzles, extractor, wrench, 11 tips
Dual LED digital displays to show precision temperature for hot air and iron
SAMSUNG microcomputer control, quick warming-up very stable temp
PID technology to enhance temperature stability
Easy to adjust the airflow and temperature control with arrows on station
Automatically stop rotation when the temperature is less than 70 Degrees Celsius
Handle sensor- hot air gun automatically turns off when set back on rack and turns back on when picked up.
Automatic cooling function for effectively prolonging the heater's life and protecting the hot air gun.
Soldering iron w/ plastic stand: ESD design to protect sensitive components Voltage: 110V/ AC
CE approved
Essential product for cell phone repair, laptop repair, circuit boards, etc
Specifications: Hot Air Gun: Power: 640W Fan: Brushless ball Resistant: <2 -="" 120l="" 45db="" airflow:="" handpiece="" max.="" min="" mm="" noise:="" ohms="" size:="" span="">
temp stability: + -1 degree celsius -Temp. Control: 100 - 480 Degrees Celsius
Soldering Hot Iron: Power: 60W Iron: ESM design Resistant: <2 -="" 200="" 480="" 900f="" at="" before="" celsius="" control:="" degree="" degrees="" during="" has="" heater="" iron="" material:="" nichrome="" ohms="" plastic="" please="" protect="" remove="" shipping="" soldering="" span="" stability:="" temp.="" tip="" to="" top="" use.="">

Customer Reviews


Ive only used it about twice but im really impressed with this station (898D). Its far superior to my handheld butane solder iron or my weller 50watt simple plug in style. This thing is pretty sweet, you can select temperature for both the heatgun and solder iron, granted its in Celsius but not a huge deal. The heatgun element will only heat when its off the stand which is a nice feature, when you place it back on the stand/station it starts an auto cool down. The solder iron im pretty sure works off of inductive heating, it will digitally show you it heating up, from cold to solder temp takes maybe 30-45 seconds. When you shut it off, it auto cools down. Also there is a fan speed control for the heatgun, so you can select the temp and then how hard you want it to blow. The 11 attachment pieces includes just about everything you need for all projects, also you get 3 or 4 heatgun nozzles for different size projects. Im really quite impressed with the features you get with the price you pay. I guess the only real con is the solder iron itself could be constructed from better material but overall everything feels solid and not really cheap. I would defiantly buy it again, this is by far the best and coolest soldering device i have ever owned.
See more product details



โพสต์แนะนำ

วงจร PANASONIC TC-21RX20C GP41Z Chassis Service Manual Schematic Circuit